headstock bearings and seals honda xr200 xr 200 1980 Honda CR50 ACI603 & ACI604 or if

ACI603 & ACI604 or if you have an EFI Technology unit it will replace the following CDI stamped units AC2i

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on an R60 for the years and models shown above

This set of headstock bearings are taper roller style and have been manufactured to replace the original steering / headstock bearings on a Kawasaki Z1000 / KZ1000 for the years shown above

Honda CBF 600 S (2004-2009)

This ignition coil pack has been manufactured to replace any of the original coils on a Kawasaki GPZ1000 / ZX1000 A1-A3 with original part numbers 21121-1137 or 21121-1138

headstock bearings and seals honda xr200 xr 200 1980 Honda CR50 ACI603 & ACI604 or ifBrand new set of headstock steering bearings and seals to fit: Honda XR 200 R (1980). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda XR200 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different