headstock bearings and seals ktm egs400 egs 400 1996 1997 Suzuki CS50 Yamaha SRX 600 (1XL) (1986-1989)

Yamaha SRX 600 (1XL) (1986-1989)

3RW-82310-01

This set of carburettor to head intake / inlet rubber manifold rubbers have been manufactured to replace the original set on a Kawasaki ZR-7 / ZR-7S for the years and models shown above

This ignition coil has been manufactured to replace the original stick coil on a Kawasaki Ninja 300 for the years and models shown above

This set of Goldfren brake pads will fit the rear brake on a Suzuki GS500 for the years and models shown above

headstock bearings and seals ktm egs400 egs 400 1996 1997 Suzuki CS50 Yamaha SRX 600 (1XL) (1986-1989)Brand new set of headstock steering bearings and seals to fit: KTM EGS 400 (1996 1997). KTM EGS E 400 (1997). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM EGS400 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements.